The 100 H and 80H DC bio module is ideal to install in a newly built fireplace, and can be used to create two different environments on the same wall. It can be adjusted to the desired height. It optionally has a powerful and silent turbine, which can be disassembled inside the fireplace to facilitate handling after coating. With a minimum consumption of 50 watts and a maximum of 112 watts, it drives air at 430 m³/ h.
Trim frame dimensions
Frame width: 93mm., 38mm.
Bio 80-H DC, Bio 100-H DC models
Wide frame. 957 x 686, 1157 x 686
Narrow frame. 847 x 631, 1047 x 631
Bio 80 H DC
Minimum nominal performance
78%
Maximum performance according to installation
83%
Minimum rated power with 3 kg load
12 kw 10,320 kcal / h
Maximum power with 4.5 kg load
20 kw 17,200 kcal / h
Concentration with medium at 13% O²
0.20%
Chimney diameter
200 mm.
Vermiculite inner weight
144 kg.
Folded steel inner weight
148 kg.
Reinforced steel inner weight
162 kg.
Log admission
67 cm.
Volume to be heated according to climatic zone and insulation
400 m³.
Bio 100 H DC
Minimum nominal performance
78%
Maximum performance according to installation
83%
Minimum rated power with 3.5 kg load:
14 kw 12,040 kcal / h
Maximum power with 6 kg load:
25 kw 21,500 kcal / h
Concentration with medium at 13% O²
0.15%
Chimney diameter
200 mm.
Vermiculite inner weight
173 kg.
Folded steel inner weight
177 kg.
Reinforced steel inner weight
192 kg.
Log admission
87 cm.
Volume to be heated according to climatic zone and insulation
475 m³.